Blinds
 
Home | About Us | Contact Us | My Account
 
Sign Up | Login
Go
Installation Guides

VERTICAL BLINDS FITTING INSTRUCTIONS

Top Fix: Snap-In (A):
Slot the front lip of the headrail over the leading edge of the bracket and snap upwards securely into position.
Top Fix: Rigid (B):
Slot the front lip of the headrail over the leading edge of the bracket, push upwards and tighten screw to secure. (Be careful not to overtighten).
Face Fix: (C):
Slot the back lip of the headrail over the locating grove of the bracket, push upwards and tighten screw to secure. (Be careful not to overtighten).
Attaching the Vanes
With the control in the open position, slip the hanger up and into the traveller hook as shown.
(Use the 1st or 2nd position as desired).

Stabilizing Chain
Present each clip to the weight post at a 45' angle as shown and push securely onto post.

Note. If installing blinds with a split draw, cut chain at the parting point.


ROMAN BLINDS FITTING INSTRUCTIONS

Outside Recess.
1.Fit bracket using face fix option.
2. Clip headrail onto front of bracket.

Inside recess.
1. Fit bracket using top fix option, do not fully tighten screw.
2. Clip headrail onto front of bracket.
3. Fully tighten screw.



ROLLER BLINDS FITTING INSTRUCTIONS

  • Do not unroll blind.
  • Fit brackets to required position.
  • Fit idle end into bracket then insert chain end into opposite bracket.
  • Peel tape off blind.
  • Your blind is now ready,use chain to raise and lower.
INSTALLING 16mm, 25mm, 35 mm and 50 mm Slat Metal Venetian Blinds

The brackets provided should be installed 3" from the end of the headrail and the remainder (if any) spread between and no more than 31" apart. Ensure the swivel section of the brackets are in the open position. Offer up the headrail and lock swivels as shown.